Vertical machining center JN-V850
Specification Table
|
Model |
Unit | JN-V850 | |
|
Travel |
X axis |
mm(inch) |
800 (31.5) |
|
Yaxis |
mm(inch) |
500(19.7) |
|
|
Z axis |
mm(inch) |
500(19.7) |
|
|
Spindle nose to table |
mm(inch) |
150*650(5.9*25.6) |
|
| Spindle centre to solid column surface |
mm(inch) |
520(20.5) |
|
|
Table |
Working area |
mm(inch) |
900*500 (35.4*19.7) |
|
Max.loading |
kg |
500 |
|
|
T-stots(No.*Width*Pitch) |
mm(inch) |
5*18*125(5*0.8*5.0) |
|
|
Spindle |
Tool shank |
- |
BT40 |
|
Speed |
rpm |
12000 |
|
|
transmission |
- |
Direct drive |
|
|
Bearing lubrication |
- |
Grease |
|
|
Cooling system |
- |
Oil cooled |
|
|
Spindle motor max.raling |
kw(HP) |
11(15) |
|
| Axis motor max.ralingmax.rating(MITSUBlSHI> |
kw |
|
|
|
Axis motor max.rating(FANUC) |
kw |
|
|
|
Feed rates |
Rapids on X/Y/Z axis |
m/min |
36/36/3 |
|
Max.Cutting feedrate |
m/min |
16/16/16 |
|
|
Tool magazine |
Tool storage capacity |
pcs |
24 |
|
Type of tool(optional) |
type |
BT40 |
|
|
Max.tool diameter |
mm(inch) |
85(3.3)arm |
|
|
Max.tool weight |
kg |
7 |
|
|
Max.Tool length |
mm(inch) |
300(11.8)arm |
|
|
Avg.changing Time(ARM) |
Tool to tool |
sec. |
1.5 |
|
Air source required |
kg/cm² |
6 up |
|
|
Accuracy |
Positioning(VDI3341) |
mm(inch) |
0.01(0.0004) |
|
Repeatability(VDI3341) |
mm(inch) |
0.005(0.0002) |
|
|
Dimension |
Machine weight(net) |
kg |
4500 |
|
Power source required |
kva |
15 |
|
| Shipping Floor plan(L*W*H) water (ank and chip conveyor not included |
mm(inch) |
2100*2400*2800 (82.7*94.5*110.2) |
|
|
Floor plan(L*W*H) |
mm(inch) |
3470*2260*3200 (136.6*88.9*125.9) |
Configuration List
| Standard Accessories |
| Fanuc controller |
| Spindle speed 8000/10000/12000/20000 rpm(depend on machine model) |
| Automatic tool changer |
| Full splash guard |
| Heat exchanger for lectric cabinet |
| Automatic lubricating system |
| Spindle air blast system |
| Spindle oil cooler |
| Spindle air curtain |
| Spindle orientation |
| Coolant gun and air socket |
| LED light |
| Rigid tapping |
| Coolant system and tank |
| Cycle finish indicator and alarm lights |
Note: Due to the continuous research and development of products and continuous technological innovation, the company has the right to change and the right to final interpretation, without prior notice.
■ Introduction of Machine Tool
·V850, a newly designed series of highly efficient vertical machining centers, has set a new milestone in the field of standard vertical machining centers. It demonstrates the value of its existence with its simplicity of operation, modern design, durable structure and unprecedented high performance and price.
·The perfect combination of machine tool performance and stability is a new achievement created by Jiangnan CNC engineers on the basis of years of experience. It is a reliable production equipment with impeccable performance under the condition of high speed and high precision. This brand new product line will improve your processing ability and quality level.
■ Direct Connection Drive Structure
.The spindle box of spindle direct connection type adopts thermal symmetry to reduce the influence of thermal deformation of spindle on the dimensional accuracy of parts.
.The design of the main shaft structure of the heat insulation source reduces the thermal displacement. Improve the accuracy and life of the spindle.
.It is superior to the swaying cutter with the new structure of floating cutter, avoiding bearing bearing bearing directly bearing cutter force and prolonging bearing life.
■ High Performance Spindle
.Blow air in the center of the spindle to keep the tool handle clean and improve the processing accuracy.
.The air curtain protection of the spindle prevents dust particles from entering the spindle bearing and improves the service life of the spindle.
.The nozzles integrated around the spindle avoid adjusting the single nozzle when processing complex shapes.
■ New Generation Control System
.The control system is equipped with the highest performance high-speed precision control system, Mitsubishi M80 system, full touch panel, which improves the accuracy, production efficiency and process safety.
.The number of control programs and the memory system of the control system are more than those of the previous models.
.The control system is equipped with SD card to increase the memory element.
.The control system has many kinds of error compensation. Achieve high precision processing.
.Because of the isolation between tool storehouse and processing area, the tool is well protected from chip contamination.
.Standard matching is the most advanced simultaneous servo tool library, which greatly improves the efficiency of tool changing while ensuring the stability of tool changing.
.Three axes adopt one-in-one bearing seat, all kinds of loads acting on machine tools will eventually be transferred to the bed through various links, greatly improving the dynamic performance and transmission rigidity of the machine. Due to some reasons such as processing difficulties and processing accuracy, very few domestic have this innovative structural design.
.Pursuing perfection and perfection, we have persistent persistence and pursuit of high-quality products and the quality spirit of Pursuing execellence.
.The air pressure system is centralized and hung outside the protection. It is easy to manage and maintain the position of the injector. It is convenient to add lubricating oil, far away from electrical components, ensuring safety and easy to use.
