Wheel Hub Machining Center JN-LG26
| Item | Unit | JN-LG26 | |
| Table | Table size | mm | 1000*600 |
| Working area | mm | 900*700 | |
| T-slots（pitch*Width*No.） | mm | 100*18*5 | |
| Max.loading | kg | 800 | |
| Travel | X/Y/Z axis travel | mm | 900/700/600 |
| Spindle nose to table | mm | 200-800 | |
| Spindle center to solid column surface | mm | 710 | |
| Spindle | Spindle taper | HSK A63 | |
| Spindle speed | rpm | 18000(with water cooling machine） | |
| Transmission type | Electric,German INNA or Haozhi | ||
| Spindle motor | kw | 26 | |
| Spindle motor | Torque | N.m | During 6000 rpm, continuous rated torque reach 29N.m，1/2H torque reach 70N.m |
| Feed rates | Cutting feedrate（X/Y/Z axis） | mm/min | 1～10000 |
| Rapids on X/Y/Z axis | mm/min | 36000/36000/36000 | |
| Accuracy | Positioning | mm | 0.008 |
| Repeatability | mm | 0.005 | |
| Automatic tool change system（Optional） | Tool storage capacity | T | 24 |
| Tool change | Disc arm | ||
| Max.tool diameter | mm | Φ85（φ150） | |
| Max.tool length | mm | 300 | |
| Max.tool weight | kg | 7 | |
| Type of tool | HSK A63 | ||
| Avg.changing time | s | 2.5(T-T) | |
| Others | Air source required | kg/cm2 | 5-6 |
| Max.working rate | mm/min | 10000 | |
| Power source required | kva | 30 | |
| Machine weight | kg | 7500 | |
| Floor plan(L*W*H) | mm | 3841*2889*2886L*W*H （with water tank） | |
Write your message here and send it to us
